How To Clean iRobot Roomba: Step-by-Step Procedure!

iRobot Roomba vacuum cleaners are efficient, smart home devices that keep your floors spotless with minimal effort. But, over time, dust, debris, etc., can reduce its suction power and potentially affect its navigation and peak performance. Therefore, regular cleaning of this device is essential. In this guide, we will take you through the quick instructions on How To Clean iRobot Roomba to ensure it continues working efficiently. For more insights, read this guide!

How to Clean iRobot Roomba Filters in Different Ways?

Generally, keeping your Roomba filters clean is the most important aspect to ensure its optimal performance, especially its suction power. Besides the standard method of filter cleaning, you can also opt for the alternative way to clean the Roomba filter. So, if you are interested in learning to Clean Roomba Filter in different ways, have a look at the steps below:

Initially, press the bin release button on the back of your robot.
Now, remove the bin from the release bin tab, which has a bin icon.
Then, open the bin door and empty your bin.
Further, grasp a side of the filter and remove it from the left side of the bin.
After that, shake off all the debris and tap the filter against the trash container.
Now, replace the filter and rinse out the excess debris with warm water.
Wait for some time and let the bin dry completely.
Then, place the filter back into the bin.
Hereon, slide the bin into its corresponding slot and secure it in its place.
Finally, you learned to Clean Roomba Filter.

Note: You can opt for this process for the Roomba e series., i Series, j series, and Combo 10 max robot.

Alternative Way to Clean Roomba Filter

Apart from the aforementioned simple procedure for cleaning the Roomba vacuum filters, there is another alternative for the same. If you have failed to clean your Roomba vacuum filters using this method, then here is How To Clean iRobot Roomba alternatively:

Firstly, remove the dustbin by pressing the release button on your dustbin.
Now, locate the filter inside the bin.
Then, gently pull out the filter from its compartment.
Hereon, use the compressed air to pull out the excess dust or dirt inside the filters.
Make sure you are doing it outdoors and have a garbage bin.
Now, use a soft brush or cloth to remove the remaining debris or dust particles.
Avoid using water, because most of the Roomba filters are not washable.
After that, re-insert the filter by sliding it back inside the bin.
Finally, place the dustbin into the robot and secure it properly.

Final Words

All in all, this quick guide helps you to understand the effective ways of How To Clean iRobot Roomba filters and bins quickly. However, you can clean your Robot quickly in no time without any technical expertise. In this way, you can optimize your device performance and make the most out of it.